Heat Transfer Silicone Ink YS-8810
Features YS-8810
1. Sharp 3D effect, easy to get HD effect with great tenacity.
2. Used for manual and machine silicone heat transfer printing.
3. Can be mixed with color pigments for printing.
4. Semi-matte surface,Can apply glossy or matte silicone on top to get high density matte or glossy effect.
5. flat, good screen release during printing, fine colloid, high printing efficiency
Specification YS-8810
| Solid Content | Color | Smell | Viscosity | Status | Curing Temperature |
| 100% | Clear | Non | 300000mpas | Paste | 100-120°C |
| Hardness Type A |
Operate Time (Normal Temperature) |
Operate Time On Machine | Shelf-life | Package | |
| 45-51 | More Than 24H | More than 24H | 12 Months | 20KG | |
Package YS-8810 And YS-886
USE TIPS YS-8810
Mix silicone with curing catalyst YS-886 at ratio 100:2.
For curing Catalyst YS-886 , It is usually added by 2%。The more you add, will dry more faster, and the less you add, the will dry more slower.
When you add 2%, at room temperature of 25 degrees, the operation time is more than 24 hours,when the move oven temperature reaches 120 degrees ,and the silicone 8 Seconds will surface dry.
Sharp HD Silicone For Printing can have good smooth surface,longer proceed time,easy have high density 3D effect,reduce the print time ,no waste,enhance the working efficiency.
When need matte or shinny effect,please print one time surface coating by matte /shinny silicone.or printing on matte PET paper or glossy PET paper.
If the silicone can not be used up on the day, the remaining can be stored in the refrigerator and can be used again the next day.
High density silicone can mix pigment to make color printing,also can direct printing make clear effect.